Turbo blower NX Series
Turbo blower NX series, which was developed born form the state-of-the-art aerospace technologies only Neuros, is a masterpiece boasting the highest performance and excellent reliability. The Combination of highly efficient impeller, air bearing and PMSM guarantees the highest performance as well as eco-friendly and user-friendly.
NX Series is widely applied to industrial process, water and waste water treatment, due to various operating point that customer need all over the world.this is why customer admits the turbo blower NX series is the best
- Suction Flow Rate : 9 ~ 532 ㎥/min
- Discharge pressure : 0.3 ~ 1.0 kgf/㎠ G
- Turndown : 45 ~ 100%
- Noise Level : Below 85dB(A)
- 100% Oil-free system
- Compliance with ISO5389, ASME PTC 10
The Highest Performance
Impeller, completed in optimized aerodynamic design and elemental technologies specialized in high rotation, such as PMSM, VFD are make performance of NX series high.
turbo blower NX series will be able to recover the investment within two years by energy saving of 30~50% compared to PD blower, resulting from providing the world best in performance reaching up to 75% of system efficiency.
Self-developed Permanent Magnet Synchronous Motor(PMSM) has a high efficiency and power factor of more than 95% for high speed operation, which operates the blower with negligible mechanical loss during operation thanks to the rotor of motor and impeller being directly coupled.
VFD(Variable Frequency Drive) enables to remove waste of energy by controlling the rotational speed of PMSM in order to adjust discharge pressure and flow rate, in a wide operating range of 45~100%.
EXCELLENT RELIABILITY
Economical Life Cycle Cost
NX series can maximize the profitability of end users through significant reduction of LCC.
There is no regular maintenance except replacing air filter, composed of 2 stages, protects the mechanical and electrical components and increases their efficiency.
Customer Oriented Technology
User-friendly and eco-friendly technology is implemented for convenience.
1. PLC and touch screen allow end-users to easily control, monitor and diagnose and to run in automated mode at constant speed, pressure, flow or dissolved oxygen control mode.
2. Various languages are available including English, Chinese, Japanese, Korean, Turkish and Russian.
3. It is possible to reduce the installation costs up to 40-50% and plug & play operation thanks to the small footprint and all-in-one package.
4.It is operated with 100 oil-free by removing the lubrication system and has very low vibration of less than 1mm/s and noise levels in combination with non-contact air bearing and patented enclosure.
Application
Technical Specification
- Discharge Pressure: NX series(0.3 ~ 1.0 kgf/cm2 G)
- Reference Conditions: 1.033 kgf/cm2 A, 20ºC, 65% RH
- Tolerance: Air Flow ±4%, Power ±5%
- Compliant with ISO5389, ASME PTC 10
- The specification of the product may be changed for improvement of performance without notice
Performance Map
